Rebuilding Steering Gear Boxes

If you’ve ever been put into a situation where you had to rebuild a steering gear box, you probably quickly found out that it’s not a very intuitive process if you are not a mechanic or don’t have a history of working with cars. That’s why we at Rocky Mountain Driveline, the best auto re-manufacturing company in the Denver area, decided it would be a good idea to explain some of the basics in order to make your life a little bit easier.

If you’re not familiar with the terminology, a steering gear box works as part of the steering system. You’ll find it down by the lower end of the steering shaft, and its function is to adjust the steering wheel’s rotary movement in conjunction with the front wheels. The steering gears, which can be found mounted on the lower end of the steering column, allow for more force to be expended when the driver is turning. Essentially, the steering gear box provides the driver with extra leverage, allowing them to control their vehicle more easily.

Steering-Gear-Box-Install

Because Rocky Mountain Driveline specializes in automotive equipment, we may be able to assist you in your attempt to rebuild a steering gear box if you happen to live near the Denver area. However, don’t worry if it’s not convenient for you to make it to the Denver area. With the proper patience and attention to detail, most of you can probably figure out how to rebuild a steering gear box on your own. Some vehicles no longer use these as part of their steering mechanisms, but the professionals at Rocky Mountain Driveline are still fully capable of working on them.

The box itself is connected to the vehicle’s chassis. Inside of the steering box’s worm gear, you will see recirculating ball bearings. These serve to cut down on the amount of friction and slop. The pitman arm, which is an integral part of the entire steering system, translates input. The gear, along with the bearings, react to this input.

Regardless of whether or not your current vehicle using a steering gear box system, learning how to rebuild one can be a useful skill. When it comes to the Denver area, nobody knows how to work on this device with the same level of expertise as the guys at Rocky Mountain Driveline. Founded by Scott Farley in 1997, Rocky Mountain Driveline is a company of experts with an impeccable knowledge of automotive equipment. To put it simply, we know what works and what doesn’t. So if you’re not sure about what to do with your gear box, or you need some other piece of equipment for your vehicle, don’t hesitate to call us today.

This entry was posted in Steering Gear Box and tagged , . Bookmark the permalink.